Yamaha

collapse expand iconDescription

Yamaha's DBR12 powered speaker ushers in a new era of high-performance, grab-and-go PA. Packing a potent 1,000W amplifier and custom-designed 12" woofer, the DBR12 cranks out a whopping 131dB of full-range sound. Despite its formidable output, this revolutionary speaker tips the scales at under 35 pounds, courtesy of a lightweight yet durable enclosure equipped with ergonomic handles. The DBR12 is Yamaha's most portable powered speaker that harnesses the same cutting-edge DSP and amplification technology as their professional DSR and DXR series.

High-Efficiency 1,000W Amplifier

At the heart of the DBR12 is a lightweight, Class-D amplifier that churns out 1,000W of power with remarkable clarity and precision. This high-efficiency design, combined with Yamaha's optimized DSP algorithms, enables the DBR12 to achieve arena-worthy volume levels without sacrificing accuracy or overtaxing its components.

Custom-Designed 12" Woofer and 1.4" Tweeter

Yamaha developed the DBR12's woofer and tweeter in-house to deliver the purest, most natural sound possible at any volume. The rigid, high-power woofer pumps out tight, defined bass with minimal distortion. Paired to a 1.4" compression driver and precision waveguide, the tweeter reproduces midrange and high frequencies with stunning resolution.

Onboard 2-Channel Mixer

Despite its compact size, the DBR12 incorporates a built-in 2-channel mixer for blending multiple inputs. Channel one features both XLR and 1/4" inputs for microphones and line-level devices. Channel two provides 1/4", RCA and 3.5mm inputs, allowing you to connect everything from keyboards and electronic drums to MP3 players and laptops. Select either the CH1+2 mixed output or CH1 thru output depending on your needs.

Lightweight, Durable Enclosure

Yamaha designed the DBR12's plastic enclosure to be as lightweight, portable and road-ready as the components inside. The wedge-shaped cabinet can be set up and torn down in minutes. M8 rigging points allow for permanent installation, while the 50-degree angle provides ideal floor monitor positioning. A rugged steel grille protects the woofer and tweeter and ergonomic handles make transporting the DBR12 a breeze.

Open Box Yamaha DBR12 12" Powered Speaker Level 2  197881306281
Open Box Yamaha DBR12 12" Powered Speaker Level 2  197881306281
Open Box Yamaha DBR12 12" Powered Speaker Level 2  197881306281

collapse expand iconFeatures

Speaker configuration
  • Active/passive: Active
  • Type: Two-way full range
  • LF driver: 12"
  • MF driver: N/A
  • HF driver: 1.4" ferrite driver
Power
  • Amplifier class: D
  • Wattage: 465W RMS, 1,000W peak
  • Mixer/preamp: 2 channel
Audio
  • Frequency response: 52Hz–18kHz
  • Coverage pattern: 90º x 60º
  • Max SPL: 131dB
Inputs
  • XLR: 2 XLR/TRS
  • TRS:
  • TS:
  • RCA:
Output/thru
  • XLR: 1 mix output
  • TRS:
  • TS:
  • RCA:
  • speakON:
Enclosure
  • Cabinet material: Polypropelene
  • Width: 14.7"
  • Height: 23.7"
  • Depth: 13.7"
  • Weight: 34.8 lb.

collapse expand iconSpecs

  • Type: 2-way, Biamp powered speaker, Bass-reflex type:
  • Frequency range (-10dB): 52Hz–20kHz
  • Nominal coverage, H: 90º, V: 60º
  • Components: Diameter: 12" cone, Voice Coil: 2", Magnet: Ferrite
  • HF: Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite
  • Crossover: 2.1kHz: FIR-X tuning (linear phase FIR filter)
  • Output power: Dynamic: 1,000W (LF: 800W, HF: 200W)/Continuous: 465W (LF: 400W, HF: 65W)
  • Maximum output level (1m; on axis): 131dB SPL
  • I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
  • Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
  • Heat dissipation: Fan cooling, 4 speeds
  • Power requirements: 100V, 100–120V, 220–240V, 110/127/220V (Brazil), 50/60Hz
  • Power consumption: 74W (1/8 Power Consumption), 18W (Idle)
  • Cabinet material: Plastic
  • Finish: Black
  • Handle: Side x 2
  • Flying and mounting hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
  • Pole socket: 35 mm (Bottom x 1)
  • Dimensions: 376 mm (14.8")
  • H: 601 mm (23.7")
  • D: 348 mm (13.7")
  • Net weight: 15.8 kg (34.8 lb.)
  • Accessories: BBS251, BCS251, BWS251-300, BWS251-400 (optional speaker bracket, sold separately)

collapse expand iconReviews

Be the first to review the Product

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.