collapse expand iconDescription

If your system’s power supply is unclean, background noise affects your sound quality. The iPower cleans this up, addressing the problems at both the output and input stages. It makes your sound flow cleanly and effortlessly.

The iPower has four barrel tip adapters, which means it’s compatible with all wall pin types across the world (UK/US/EU/AUS), as well as USB and center-negative audio adapters. Whatever you’re listening to, the iPower smashes through the sound barriers that hold devices back from achieving clear, uninterrupted sound.

Adapt to change
The iPower makes music come alive with incredible low-floor noise and adds detail originally lost through conventional power supplies that are often just mobile phone chargers that have no regard for quite power.

The iPower is at least ten times quieter than previous iFi power adapters, twenty times quieter than audiophile linear power supplies and one thousand times quieter than standard wall adapters.

At home or abroad, there’s nowhere the iPower can’t go
The iPower comes with Active Noise Cancellation+ to cancel incoming noise. Coming in 5, 9, 12 or 15 volt versions, it works with just about every audio device. Works with virtually any DC powered device.

Exceptionally quiet power
The measured noise floor is 100x quieter than the Common Noise Filter.

Light and convenient to use
As it comes in 5, 9, 12 and 15 volts and with pins for the USA, United Kingdom, Europe and Australasia, it can be used all around the world.
iFi Audio iPower 15V Low Noise DC Power Supply
iFi Audio iPower 15V Low Noise DC Power Supply
iFi Audio iPower 15V Low Noise DC Power Supply

collapse expand iconSpecs

  • Input: 100-240VAC
  • Output: 5V/2.5A; 9V/2.0A; 12V/1.8A; 15V/1.2A
  • 5.5 x 2.1mm (length: 1.8 metres/5.9 feet)
  • Output plug: 5.5×2.1mm input/5.5×2.5mm output (‘C’ black)
  • 5.5×2.1mm input/4.8×1.7mm output (‘F’ black)
  • 5.5×2.1mm input/4.0×1.7mm output (‘G’ black)
  • 5.5×2.1mm input/3.5×1.35mm output (‘H’ black)
  • 5.5×2.1mm right-angled extension cable.
  • 5.5×2.1mm input/5.5×2.5mm output; Reverse Polarity Plug (‘C’ white)
  • 5v version (only) DC > micro USB cable (for Raspberry Pi or similar micro computers)
  • Noise*: 1uV
  • Size: 82x43x40 mm
  • Weight: 155g (with cable)

Featured Articles