Shure

collapse expand iconDescription

The Shure BETA 98AD/C is a precision-engineered compact, high-output miniature condenser microphone for professional sound reinforcement and studio recording. An extremely uniform cardioid polar pattern provides excellent gain-before-feedback and off-axis rejection of unwanted noise. It comes with the A98D drum mount with a flexible gooseneck that makes precise mic placement for toms, snares and hand percussion a breeze.
Shure BETA 98AD/C Drum Mic
Shure BETA 98AD/C Drum Mic

collapse expand iconFeatures

  • External in-line preamplifier for discrete cable placement
  • Uniform cardioid polar pattern provides maximum gain-before-feedback
  • Superior rejection of off-axis sound
  • Frequency response tailored for drums and percussion applications
  • Wide dynamic range for use in high SPL environments
  • Flexible gooseneck for precise placement and easy adjustments
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Type: Electret Condenser
  • Frequency Response: 20–20,000Hz
  • Polar Pattern: Cardioid
  • Output Impedance: 179 ohms
  • Sensitivity (at 1kHz, open circuit voltage): -48.0 dBV/Pa (4.0 mV)
  • Maximum SPL (1kHz at 1% THD): 1,000 ohm load: 144dB
  • Signal-to-Noise Ratio (referenced at 94dB SPL at 1kHz): 64dB (S/N ratio is difference between 94dB SPL and equivalent SPL of self noise, A-weighted)
  • Dynamic Range (at 1kHz): 1,000 ohm load: 114dB
  • Common Mode Rejection (20Hz–20kHz): > 50dB
  • Clipping Level (1kHz at 0.25% THD): 1,000 ohm load: 1.0dBV (1.26V) (THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL)
  • Self-Noise (typical, equivalent SPL, A-weighted): 30dB SPL
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Weight: Net: 12 g (.6 oz.)
  • Connector: Three-pin professional audio (XLR), male, balanced
  • Power Requirements: 11–52 VDC phantom, 3.6 mA

collapse expand iconWarranty

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Featured Articles