RME 12Mic Dante 12-channel Network Controllable Microphone Preamp with Dante
This item is backordered but is available to reserve now. You will not be charged until the item ships.
Description
The RME 12Mic-D microphone preamp gives you 12 pristine mic preamps with complete remote control for high-end studio recording and live sound. Designed for next-generation audio networking, the 12Mic-D integrates seamlessly with Dante and MADI systems to provide maximum flexibility. With 75dB of gain and outstanding 24-bit converters, the 12Mic-D captures every nuance of your performance.
Twelve Transparent Mic Preamps
The 12Mic-D's PAD-free mic preamps provide an incredible 75dB of gain with extremely low noise. The preamps are designed to add as little color as possible so you can capture the true character of any mic. With 12 preamps, you have enough inputs for miking a drum kit, guitar cabinet, piano and more. The first four channels also feature Hi-Z instrument inputs for direct recording of bass, guitar and keyboards.
Maximum Flexibility Through Dante and MADI
In addition to Dante, the 12Mic-D provides MADI connectivity with an optional optical module. The preamp integrates seamlessly with Dante networks, allowing you to combine analog and digital I/O channels. You can route any of the 12 analog inputs to the Dante network and up to 64 Dante channels back to the 12Mic-D. The preamp also provides ADAT I/O for integrating with your digital consoles and interfaces.
Roadworthy, Studio-Quality Design
RME designed the 12Mic-D to the highest standards for professional use. With fully redundant Dante ports the 12Mic-D keeps working even under demanding conditions. For no-compromise preamp tone that stands up to the challenges of professional recording, rely on the RME 12Mic-D.
Features
- 12 high-quality mic preamps with 75dB gain range
- 24-bit AD conversion for pristine audio quality
- Integrated Dante and MADI connectivity
- Remote-controllable preamp gains and routing
Specs
- XLR In 1-12:
- Input: XLR, electronically balanced
- Input impedance: 3.4 kOhm
- Gain range: 75dB, 1dB steps
- Resolution AD: 24-bit
- Frequency response @ 44.1kHz, -0.1dB: 8Hz–20.8kHz
- Frequency response @ 96kHz, -0.5dB: 4Hz–29.2
- Frequency response @ 19 kHz, -1dB: 3Hz – 43.7
- THD @ 30dB gain: < -110dB, < 0.00032 %
- THD+N @ 30dB gain: < -104dB, < 0.00063 %
- Channel separation: > 110dB
- Signal to Noise ratio (SNR): > 117dB RMS unweighted, > 120dB(A)
- Equivalent Input Noise (EIN), 30dB Gain: 123dB RMS unweighted, 125.5dB(A) @ 150 Ohm
- Maximum input level, Gain 0dB: +18dBu
- Maximum input level, Gain 75dB: -57dBu
- TRS In 1-4:
- As above, but:
- Signal to Noise ratio (SNR): 115dB RMS unweighted, 118dBA
- TRS jack, balanced
- Gain range: 42dB, 1dB steps
- Maximum input level, Gain 8dB: +20dBu
- Maximum input level, Gain 50dB: -22dBu
- Switchable high impedance (unbalanced TS): 1 MOhm
- 2 x RJ45 for Dante network connectivity (up to 64 channels)
- Coaxial via BNC, 75 Ohm, according to AES10-1991
- Optical via optional SFP module
- 62.5/125 and 50/125 compatible
- Accepts 56 channel and 64 channel mode, plus 96k Frame
- Single Speed: up to 64 channels 24-bit/48kHz
- Double Speed: up to 32 channels 24-bit/96kHz
- Quad Speed: up to 16 channels 24-bit/192kHz
- 75 ohm Word Clock BNC connectivity
- Support 44.1kHz –192kHz
- Support full or single speed operation
- Intelligent Clock Control switches clock source seamlessly
- 3 x TOSLINK
- Quad Speed (S/MUX4): 1 x 2 channels 24-bit/192kHz
- Phones 1/2:
- Resolution: 24-bit
- Noise (DR): 115dB RMS unweighted, 118dBA
- Frequency response @ 44.1kHz, -0.5dB: 9Hz–22kHz
- Frequency response @ 96kHz, -0.5dB: 9Hz–45kHz
- Frequency response @ 192kHz, -1dB: 8Hz–75kHz
- THD+N: < -100dB, < 0.001 %
- Channel separation: > 110dB
- Output: 6.3 mm TRS stereo (unbalanced) or mono (balanced) jack
- Maximum output level at 0dBFS: +13dBu (unbalanced), +19dBu (balanced)
- 2 x RJ45 for Dante network connectivity (up to 64 channels)
- Coaxial via BNC, 75 Ohm, according to AES10-1991
- Optical via optional SFP module
- 62.5/125 and 50/125 compatible
- Accepts 56 channel and 64 channel mode, plus 96k Frame
- Single Speed: up to 64 channels 24-bit/48kHz
- Double Speed: up to 32 channels 24-bit/96kHz
- Quad Speed: up to 16 channels 24-bit/192kHz
- 75 ohm Word Clock BNC connectivity
- Support 44.1kHz–192kHz
- Support full or single speed operation
- Intelligent Clock Control switches clock source seamlessly
- 2x RJ45 for Dante network connectivity
- Single Speed: up to 64 channels 24-bit/48kHz
- Double Speed: up to 32 channels 24-bit/96kHz
- Quad Speed: up to 16 channels 24bit/192kHz
- MADI input redundancy (requires optional SFP module)
- Internal routing of up to 268x282 channels
- 19” enclosure 1 unit height
- 1,54” full color display with control knob and four buttons for convenient, direct access to all features
- Remote control via HTTP & JSON
- internal PSU, optional 12V DC redundant power supply
- USB 2.0 (for remote control and firmware updates)
- DC-coupled outputs
- Dimensions: 17.3” x 1.7” x 9.6”
- Weight: 6.2 lb.
- Power supply: internal 30 W 100-240 V AC, external 12 V 2.5 A DC (optional)
- Power consumption: typ. 20 W, standby 0.5W