Gear SpecialistBundlingMusician
Open Box
Open Box Shure SLXD14 Combo System with SLXD1 Bodypack and SLXD4 Receiver Level 1 Band G58
(0)|Q&A|Item #:L75648004001000
Condition: Open Box - Like New
6-month special financing^ + $28 back in Rewards** Limited time Learn More
Lease-To-Own Purchase OptionsLearn more
Protect your gearLearn more
Cover drops, spills or cracks with Pro Coverage
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Videos (7)
View AllShure SLX-D Digital Wireless Overview
SLX-D How To: Set Up and Use
SLX-D How To: Add a Receiver
SLX-D How To: Lock and Unlock
![Shure](https://static.guitarcenter.com/derivates/1163_Shure_logo_2019_1_2019-05-03_171850.jpg)
Description
SLX Wireless Systems like this SLXD14 Combo System, are powerful wireless tools that can be set up quickly and used confidently by installers and working bands. Features include auto frequency scan with transmitter setup, exceptional wireless clarity and Shure patented Audio Reference Companding.
Includes WL93 lavalier microphone, SLX1 bodypack transmitter, SLX4 receiver, tie clip, rackmount kit, two 1/4 wave antennas, power supply, two AA batteries, protective bumpers with eight screws, vinyl bag and user guide.
Choose from one of three bandwidths:
G58: 470–514mHz
H55: 514–558mHz
J52: 558–616mHz
Includes WL93 lavalier microphone, SLX1 bodypack transmitter, SLX4 receiver, tie clip, rackmount kit, two 1/4 wave antennas, power supply, two AA batteries, protective bumpers with eight screws, vinyl bag and user guide.
Choose from one of three bandwidths:
G58: 470–514mHz
H55: 514–558mHz
J52: 558–616mHz
Features
- 1 rackmount kit
- 2 1/4 wave antennas
- 1 power supply
- 2 AA battery
- 1 vinyl bag
- Protective bumpers with eight screws
Specs
SLX Working Range:
- Line of Sight: 100 m (300') (Note: Actual range depends on RF signal absorption, reflection and interference.)
- 45Hz–15kHz (Note: Dependent on microphone type)
- Ref. ±38 kHz deviation with 1 kHz tone, <0.5%, typical
- >100 dB, A-weighted
- -18°C (0°F) to +50°C (122°F) (Note: Battery characteristics may limit this range.)
- Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4" output
- Gain position
- mic: −10 dBV maximum
- 0dB: +10 dBV maximum
- –10dB: +20 dBV maximum
- 30dB
- 1 mohm
- 10–30 mW (varies by region)
- TA4M:
- 1: ground (cable shield)
- 2: + 5 V Bias
- 3: audio
- 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
- 108 mm x 64 mm x 19 mm
- 81 g (3 oz.), without batteries
- Galvanized steel
- 2 "AA" size alkaline or rechargeable batteries
- Up to 8 hours (alkaline)
- 42 mm x 197 mm x 134 mm
- 1 lb. 13 oz.
- Galvanized steel
- –105dBm for 12dB SINAD, typical
- 12–18V DC @ 150 mA, supplied by external power supply (tip positive)
- Impedance balanced
- Ref. ±38kHz deviation with 1kHz tone
- –13 dBV (into 600 ohm load), 6.35 mm (1/4")
- –2 dBV (into 3 kohm load)
- XLR connector: 200 ohm, 6.35 mm (1/4")
- XLR connector: 1=ground, 2=audio, 3=no audio
- Tip=audio, Ring=no audio, Sleeve=ground
- >70dB, typical
- 0dB to –25dB