Shure

collapse expand iconDescription

The MX202 MicroFlex condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202 features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The inline preamp offers easy microphone stand or ceiling installation, and when combined with the high-sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The MX202 MicroFlex includes a mic stand adapter and requires phantom power.

It's also available with a plate-mounted preamp (see product #270396). 
Open Box Shure MX202 MicroFlex Condenser Microphone with Inline Preamp Level 1 Bright White Cardioid
Open Box Shure MX202 MicroFlex Condenser Microphone with Inline Preamp Level 1 Bright White Cardioid

collapse expand iconFeatures

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Balanced, transformerless output for increased immunity to noise over long cable runs
  • Supplied stand-mount adapter for portable applications

collapse expand iconSpecs

Frequency Response
  • 50Hz–17kHz
Output Impedance
  • 180 ohms actual (EIA rated at 150 ohms)
  • Sensitivity (At 1,000 Hz, open circuit voltage*)
  • Cardioid: -35.0 dBV/Pa (17.8 mV)
  • Supercardioid: -33.5 dBV/Pa (21.1 mV)
  • All values -12dB at 0 gain; *1 Pascal = 94dB SPL
  • Maximum SPL (1kHz at 1% THD, 1 kohm load)
  • Cardioid: 124.2dB
  • Supercardioid: 122.7dB
  • All values +6dB at 0 gain
Equivalent Output Noise (A-weighted)
  • Cardioid: 28dB SPL
  • Supercardioid: 26.5dB SPL
Signal to Noise Ratio (referenced at 94dB SPL)
  • Cardioid: 66dB
  • Supercardioid: 67.5dB
Dynamic Range at 1 kohm load
  • 96.2dB
  • 100dB at 0 gain
Common Mode Rejection
  • 45dB minimum
Preamplifier Output Clipping Level (1% THD)
  • -6.0 dBV (0.5 V)
  • -12 dBV at 0 gain
Polarity
  • Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements
  • 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
  • Operating Temperature Range: -18 to 57 degrees ºC (0 to 135 degrees ºF)
Relative Humidity
  • 0 to 95%
Cable Length
  • 9 m (30')

Featured Articles