Videos (1)

View Allarrow icon
Meet The Power Of Consistency | CDL10P & CDL Sub18 | PreSonusplay button

Meet The Power Of Consistency | CDL10P & CDL Sub18 | PreSonus

collapse expand iconDescription

The result of years of research and development, the PreSonus CDL12P powered loudspeaker combines the best attributes of point source and line array technology using a unique constant-directivity design that radiates a highly focused pattern with consistent SPL throughout the frequency-response range, both on- and off-axis. With the CDL12P, the eight 2" high-frequency drivers arc over a single 12" woofer, comparable to the coaxial driver configuration found on top studio monitors. The result is better sonic coherence across the entire venue. Regardless of how many CDL12Ps you stack, you're working with a shared acoustic axis—and non-turbulent sound propagating throughout the room. The result is clear, articulate speech intelligibility and natural music reproduction.


PreSonus CDL12P Point Source/Line Array Constant Directivity Loudspeaker
PreSonus CDL12P Point Source/Line Array Constant Directivity Loudspeaker
PreSonus CDL12P Point Source/Line Array Constant Directivity Loudspeaker

collapse expand iconFeatures

  • Can be used on individually or in an arrayed pair on a tripod stand, atop an 18" PreSonus subwoofer or in a flown installation of up to six CDL12Ps in a vertical array
  • Great choice for touring bands and mobile DJs, as well as for fixed installs in small and midsize venues

collapse expand iconSpecs

Acoustic Performance
  • Configuration: Active 2-way
  • Frequency Response (-3dB): 48Hz–18kHz
  • Frequency Response (-10dB): 42Hz–19kHz
  • Maximum Peak SPL: 131dB
  • Crossover Frequency: 420Hz
Amplifier
  • Type: Class-D
  • Total Power Output: 2,000W Peak, 1,000W Program (500W RMS)
  • LF Power: 1,000W Peak, 500W Program (250W RMS)
  • HF Power: 1,000W Peak, 500W Program (250W RMS)
  • Rated THD: <0.05% (20Hz–20kHz)
  • Dynamic Range: 119dB (A-weighted)
  • Bandwidth: 20Hz–20kHz
Connections and Controls
  • Input Channels: 1 Line
  • Input Connector Types: 1 XLR
  • Line Input Impedance: 40 kohm
  • Maximum Input: +4 dBu
  • Output Connector: Direct Line Out (XLR)
  • Networking: Dante (Audio and Control), Control (only) via Locking Ethernet
  • Controls: Preset Select HPF On/Off
  • Indicators: Over Temperature, Signal, -3dB, Limiter, Clip, Network Status
DSP
  • Effects: 90 High-pass filter, Array Mode (1-6 boxes), Sub Mode (Off, CDL18s, ULT18, or AIR18s)
  • HPF: 90Hz, 4th-order Butterworth
  • Bit Depth: 24-bit
  • Sample Rate: 48kHz
Suspension Mounting
  • Rigging Points: Integrated Rigging (10:1 load)
  • Mounting: Dual-position pole mount (0° and 10°) 35 mm

collapse expand iconWarranty

One year parts and labor warranty.

Featured Articles