Mogami

collapse expand iconDescription

Mogami Gold presents an elite eight-channel snake cable ideal for professional studios and live sound applications. The Mogami Gold 8 Channel DB25-XLR Male Snake Cable 10' is a premium cable that provides loss-free transmission for your most critical recording and monitoring signal paths.

Precision Dielectrics Enable Pristine Signal Transfer

Mogami Gold cables utilize precision dielectrics that preserve signal integrity for flawless translation of your audio. The eight-channel DB25-XLR Male Snake Cable supports digital recording formats from industry leaders like Digidesign, Lynx, Mackie, RME, Sony, TASCAM, Panasonic, and Yamaha. Experience your audio at its purest through this meticulously engineered interconnect solution.

Rugged and Road-Ready

While optimized for studio use, the eight-channel DB25-XLR Male Snake Cable is also robust enough for life on the road. It features rugged all-metal D-sub shells and XLR connectors to withstand the rigors of travel and repeated setup and breakdown. The included thumbscrews provide an easy, tool-free installation in any situation. A lifetime warranty from Mogami Gold gives you peace of mind that this elite-level cable will provide years of flawless performance wherever your music takes you.

Compact and Convenient

Despite its advanced design and premium components, the eight-channel DB25-XLR Male Snake Cable remains highly compact and user-friendly. At just ten feet in length, it keeps your recording space neat and uncluttered. The cable itself is also extremely pliable for simplified setup and cable management. All the superior performance of Mogami Gold is now available in a format that slots seamlessly into any studio environment or mobile recording rig.

The Total High-End Solution

Experience the pinnacle of analog interfacing with the Mogami Gold eight-channel DB25-XLR Male Snake Cable. Everything about this cable, from the premium dielectrics to the all-metal connectors, is optimized for high-end recording applications where only the best will do. Mogami Gold brings you this elite-level solution for pristine translation of your audio from end to end. Capture and monitor your sound as it was meant to be heard with the Mogami Gold eight-channel DB25-XLR Male Snake Cable, available today at Guitar Center.

Open Box Mogami Gold 8 Channel DB25-XLR Male Snake Cable Level 1 20 ft.

collapse expand iconFeatures

  • Individually twisted shielded pairs.
  • XLPE (Cross Linked Polyethylene) insulation provides superb electrical characteristics and will not melt or shrink back during soldering.
  • Rugged and flexible construction that is easy to handle, even at temperatures down to -20 deg C (-4 deg F).
  • Easy Mogami cable identification system:
  • Channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped.
  • Outer jackets of each pair are color coded by standard resistor color code, allowing quick identification of conductor pairs.
  • Inner conductors are also color coded based on the international standard resistor color code. Each pair is color coded by jacket and conductor color combination.
  • Each channel has a drain wire and served (spiral) bare copper shield. The drain wires simplify termination and can be crimped by the same size contact as the inner conductor pair.
  • CL2 rated version available. Conductor size of CL2 rated version is thicker #25AWG so that it is also recommended for rugged application and firm and easier crimp terminal connector wiring as well as NEC fire regulation requirement.

collapse expand iconSpecs

  • Conductor: 30/0.08A (0.15mm sqœ) #26AWG (30…#40AWG)
  • Insulation: 1.0 XLPE (Cross Linked Polyethylene) (0.039")
  • Drain Wire: 7/0.18TA (0.18mm sqœ) #25AWG (7…#33AWG)
  • Served Shield: Approx. 58/0.10A Served (spiral) Shield
  • Jacket (Covering): 2.8 Flexible PVC (0.110")
  • Identification: See core number identification table
  • DC Resistance at 20 deg C: Inner Pair Conductor: 0.13W/m(0.040W/Ft); Shield: 0.031W/m(0.0095W/Ft)
  • Capacitance at 1kHz, 20 deg C (Partial Capacitance Value) See Figure (1): K0: 130pF/m(40pF/Ft); K1: 12pF/m(3.7pF/Ft)
  • Inductance: 0.6H/m(0.18H/Ft)
  • Electrostatic Noise (Hum Pick-up)*: 2.5mV Max.
  • Electromagnetic Noise at 10kHz*: (Inductance of the toroidal core: 595H): 0.1mV Max.
  • Microphonics*: Method: Stepping on cable: 50mV Max. at 50kW Load
  • Voltage Breakdown: Must withstand at DC 500V/15sec.
  • Insulation Resistance at DC 125V, 20 deg C: 100000 MW … m Minimum
  • Tensile Strength of one pair (26 deg C, 65% RH): 274N
  • Emigration: Non-emigrant to ABS resin
  • Applicable Temperature: -20 deg C +70 deg C(-4 deg F +158 deg F)
  • Standard: UL13 CL2X 60 deg C / UL 20002 AWM 30V 60 deg C VW-1
  • Conductor: 7/0.18A (0.178mmœ) #25AWG (7…#33AWG)
  • Insulation: 1.05 XLPE (Cross Linked Polyethylene) (0.0413")
  • Drain Wire: 7/0.18A (Exactly same as conductor)
  • Shield: Approx. 58/0.10A Served (spiral) Shield
  • Jacket (Covering): 2.8 Flexible PVC (0.110")
  • Identification: See core number identification table
  • DC Resistance at 20 deg C: Inner Pair Conductor: 0.11W/m(0.0336W/Ft)
  • Shield: 0.031W/m(0.0095W/Ft)
  • Capacitance at 1kHz, 20 deg C (Partial Capacitance Value) See Figure (2): K0: 140pF/m(42.7pF/Ft)
  • K1: 12pF/m(3.7pF/Ft)
  • Inductance: 0.6H/m(0.18H/Ft)
  • Electrostatic Noise (Hum Pick-up)*: 2.5mV Max.
  • Electromagnetic Noise at 10kHz*
  • (Inductance of the toroidal core: 595H): 0.1mV Max.
  • Microphonics* Method: Stepping on cable: 50mV Max. at 50kW Load
  • Voltage Breakdown: Must withstand at DC 500V/15sec.
  • Insulation Resistance at DC 125V, 20 deg C: 100000 MW … m Minimum
  • Tensile Strength of one pair (26 deg C, 65% RH): 274N
  • Emigration: Non-emigrant to ABS resin
  • Applicable Temperature: -20 deg C +70 deg C(-4 deg F +158 deg F)
  • Standard: UL13 CL2 60 deg C

Featured Articles