Open Box
Open Box JBL SRX812P 2-Way Active 12" PA Speaker Level 1
Videos (1)
View AllJBL SRX812P 2-Way Active 12" PA Speaker
Description
The SRX812P 2-Way Active 12" PA Speaker fuses JBL's legendary sound quality with Crown's impressive power and efficiency. Part of JBL Professional's SRX800 line of powered PA systems, the SRX812P is a 12", 2-way speaker cabinet equipped with premium JBL drivers and 2,000W of Crown amplification with DriveCore technology. Designed for demanding portable applications, the SRX812P offers versatile configuration options and HiQnet networking connectivity for extensive system control. Experience high-performance, full-range sound in a rugged yet lightweight package with the SRX812P.
HiQnet Networking Puts Complete Control at Your Fingertips
The SRX812P features Ethercon connectivity to take advantage of HiQnet, JBL's networking protocol for configuring and optimizing sound systems. Use HiQnet Audio Architect software to fine-tune the speaker for any fixed installation or HiQnet Performance Manager for portable setups. Either platform provides comprehensive control over networking and system parameters to achieve the best sound for your application, all through an intuitive interface optimized for tablet use.
Massive 2,000W of Crown Power
The SRX812P is powered by Crown's proprietary DriveCore amplifier technology, which provides an exceptional 2,000W of peak power (1,500W RMS) in an efficient one-piece amp circuit. With an ultralow 103dB signal-to-noise ratio, the SRX812P can achieve tremendous sound pressure levels with outstanding dynamic range and minimal distortion across the frequency spectrum. Versatile power options like universal power supply with PFC and locking IEC cords allow for convenient international use and rapid setups.
Premium JBL Transducers for Pristine Sound
To deliver JBL's signature sound quality, the SRX812P features premium 12" and 3" JBL drivers housed in an enclosure engineered for sonic accuracy and balance. JBL's patented Differential Drive ferrite drivers have 3" voice coils, lighter ferrite magnets and extended low-frequency response. The neodymium 2432H compression driver is the only 3" neodymium model in its class, providing high power handling and a smooth, crystal-clear high end.
A Rugged Yet Portable Design
Purpose-built for demanding portable applications, the SRX812P combines high performance with a rugged yet lightweight design. The 18mm plywood cabinet has an impact-resistant Duraflex finish, 14 gauge steel grills and ergonomic handles for easy handling. M10 suspension points, indexed feet and pole mounts provide flexible configuration options for any setup or location. With onboard DSP, backlit LCD screen and glow-in-the-dark control panel, the SRX812P ensures an optimized experience even in low-light conditions.
Features
- 12" low-frequency driver and 1.5" compression driver
- Rugged wooden enclosure with steel grille
- Crown amplification with 1,500W RMS/2,000W peak output
- LCD screen and glow-in-the-dark markings on rear panel
- Customizable DSP
Specs
- Active/passive: Active
- Type: Full-range
- LF driver: 12"
- MF driver: N/A
- HF driver: 1.5"
- Amplifier class: D
- Wattage: 1,500W RMS/2,000W peak
- Mixer/preamp: N/A
- Frequency response: 57Hz - 20kHz
- Coverage pattern: 90 x 50
- Max SPL: 136 dB
- XLR: 2 x XLR/TRS combo
- TRS: N/A
- TS: N/A
- RCA: N/A
- XLR: 1 per input plus 1 mix
- TRS: Not applicable
- TS: Not applicable
- RCA: Not applicable
- SPEAKON: Not applicable
- Cabinet material: 18 mm Plywood
- Width: 16.3"
- Height: 25.1"
- Depth: 16.9"
- Weight: 58 lb.