Gear SpecialistBundlingMusician
6-month special financing^ + $22 back in Rewards** Limited time Learn More
Lease-To-Own Purchase OptionsLearn more
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The Mini-72 set uses individual Alnico 2 Rod magnets in a dual-coil format. No added steel , just mini-rods (.156 Dia). It’s kind of like having 2 Front-Tele Pickups side by side but fatter, from both the increased aperture and the use of Alnico 2 magnets. The Magnetic Strength is almost 1000 Gauss like a Strat Pole Piece (.187 Dia) but with the added Iron of the Alnico 2. A mix… A match… and basically a whole lot of fun.
Keep in mind that the Mini-72 set Pickups have a narrow string width sense and aren’t suitable in the bridge position of Floyd Rose equipped guitars. It was designed for the Gibson Tune-o-matic bridge width, and so it shall remain. The maximum string width should be about 2 inches (51mm).
The Pole Pieces are spaced .395 in. (10 mm) apart, with an overall width of 1.975 in. (50.1mm).
No need for string grounding, so no shock hazard. Low-impedance output so you can sound the same through a cable as well as wireless. And on top of that a 2-pickup system only requires 1.3 Milli-Amps of 9 Volt battery power.
Keep in mind that the Mini-72 set Pickups have a narrow string width sense and aren’t suitable in the bridge position of Floyd Rose equipped guitars. It was designed for the Gibson Tune-o-matic bridge width, and so it shall remain. The maximum string width should be about 2 inches (51mm).
The Pole Pieces are spaced .395 in. (10 mm) apart, with an overall width of 1.975 in. (50.1mm).
No need for string grounding, so no shock hazard. Low-impedance output so you can sound the same through a cable as well as wireless. And on top of that a 2-pickup system only requires 1.3 Milli-Amps of 9 Volt battery power.
Features
- The package includes EMG's exclusive solderless install system:
- 2 25k volume pot
- 2 25k tone pot
- 1 battery bus
- 1 stereo output jack
- 1 two pickup in/out bus
- 2 pair mounting screws and springs
- 2 pickup cables
- 4 connect cables
- 1 output cable
- 1 battery cable