Behringer Ultravoice UV1 Channel Strip and USB Audio Interface
Special order: Place an order for this item today and we’ll get it to you soon.
Description
The Ultravoice UV1 channel strip brings pro tools right to your home studio for taking vocals to the next level. With the renowned Midas microphone preamp, 192kHz high-resolution USB interface and intuitive vocal processing onboard, the UV1 makes it easy to capture studio-quality vocal performances. Designed for singers, podcasters and anyone who wants better vocal sound.
State-of-the-Art Midas Microphone Preamp
The Ultravoice UV1 features the exceptional Midas microphone preamp used by audio engineers worldwide, giving your vocals a clean, transparent sound. With ultralow noise, high gain and 48V phantom power, the Midas preamp brings out the best in any microphone. You'll hear the difference in your recordings.
Flexible Monitoring for Perfect Vocal Takes
Recording vocals requires careful monitoring to get the perfect take. The UV1's monitoring section lets you blend between the direct input signal and USB playback from your DAW, making it easy to find the ideal balance as you record. Just plug in headphones to hear your voice with zero lag.
Simultaneous Analog and Digital Connectivity
With both balanced XLR outputs and hi-res USB recording, the UV1 lets you have the best of both worlds. Connect to your interface or mixer via XLR or plug directly into your computer to record vocals to your DAW.
Intuitive Vocal Processing Tools
Shape and polish your vocals with the UV1's onboard processing tools. The compressor adds punch and presence, the de-esser tames sibilance, the enhancer brings out detail, the gate removes noise and the amp restores lost levels. Further tweak your sound by inserting external analog gear via the send/return jacks.
Features
Specs
- Mic input: Discrete mic preamp
- Type: Balanced XLR/TRS combo connector
- Impedance: 4 kΩ
- Max input level: +17 dBu
- Equivalent input noise (EIN): -126 dBu, 20 Hz - 20 kHz, 150 Ω
- Line in: ¼" TRS, balanced
- Impedance: 10 kΩ unbalanced, 20 kΩ balanced
- Max input level: 30 dBu
- Insert return: ¼" TRS, balanced
- Impedance: 5 kΩ
- Max input level: +21 dBu
- Line out: Balanced XLR, ¼" TRS
- Impedance: 100 Ω unbalanced, 200 Ω balanced
- Max output level: +20 dBu
- Insert send: ¼" TRS, balanced
- Impedance: 100 Ω unbalanced
- Max output level: +20 dBu
- Mic preamp
- Gain: Mic: 0 to +60 dB, line: -15 to +45 dB
- 48 V: +48 V phantom power, switchable
- Low cut: -18 dB/oct @ 80 Hz
- Drive: Threshold, -40 dB to +20 dB
- Density: 1 to 75 dB/sec
- De-Esser
- Frequency: 800 Hz to 10 kHz
- Threshold: Program-dependent
- Release time: Program-dependent, approx. 1 ms/dB
- Enhancer
- LF/HF detail: Min to max boost (0 dB to +12 dB)
- Expander/Gate
- Threshold: Off to +15 dB
- Ratio: 1:1 to 10:1
- Output
- Output gain: -30 to +10 dB
- Monitor
- Mix: Blend direct signal and playback
- Level: -∞ to +6 dB
- Frequency response: <10 Hz to 80 kHz (0/-3 dB)
- Dynamic range: 110 dB, A-weighted
- Type: USB 2.0, type B
- Interface: 2 in / 2 out
- Converter: 24-bit
- Sample rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
- Supported operating systems: Windows 10 / Mac OS X 10.4 or higher
- Drivers: Windows driver available on behringer.com, no drivers needed for Mac
- Switch-mode autorange power supply: 100-240 V, ~50/60 Hz
- Power consumption: 15 W
- Mains connection: Standard IEC connector
- Standard operating temperature range: 5° C – 45° C (41° F – 113° F)
- Dimensions: 483 x 150 x 44 mm (19 x 5.9 x 1.7")
- Weight: 1.5 kg (3.3 lbs)