Gallery
Description
Features
Specs
Reviews
Q&A
Behringer

collapse expand iconDescription

The Behringer System 100 110 VCO/VCF/VCA Module is an authentic reproduction of the original System 100M circuitry from the 80s, and fits in a standard Eurorack case. Mix the 110 in with your existing rig or start your modular synth journey from here.

Controlling the Oscillator
The 110 comes with a complete synth voice with an internally patched signal flow for ease of use. Plus, it saves patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms: triangle, ramp and Pulse Width Modulation, which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs.

VCF and VCA
The VCF features cutoff frequency and resonance sliders. The VCA comes with two audio outputs (low/high). Both the VCF and VCA feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.

Eurorack Ready
Installing the 110 VCO/VCF/VCA is simple. It was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up.

Whether you’re just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music.
Behringer 110 VCO/VCF/VCA Eurorack Module
Behringer 110 VCO/VCF/VCA Eurorack Module
Behringer 110 VCO/VCF/VCA Eurorack Module

collapse expand iconFeatures

  • VCO/VCF/VCA module from the '80s
  • Authentic reproduction of original System 100M circuitry
  • Complete synth voice with internal patched signal flow for ease of use
  • VCO features 3 selectable waveforms (triangle, ramp and square with PWM)
  • VCO offers pitch control over a wide range plus 1 audio output and 2 CV inputs
  • VCF features cutoff, frequency and resonance controls plus 2 audio inputs and 2 CV inputs
  • Oscillator PWM with manual and external CV control
  • VCA features gain control plus 2 audio inputs, 2 audio outputs (low/high) and 2 CV inputs
  • 17 controls and switches give you real-time access to all important parameters
  • Eurorack specs: 16 HP, 60 mA +12 V, 50 mA -12 V

collapse expand iconSpecs

Inputs
    Pulse width mod
    • Type: 3.5 mm TS jack, DC coupled
    • Impedance: >70 kΩ, unbalanced
    • Maximum input level: 0 V to +10 V, 4% per volt
    Signal input
    • Impedance: >50 kΩ, unbalanced
    • Max input level: +17 dBu @ unity gain
    VCO mod input
    • Type: 2 x 3.5 mm TS jacks, summed
    • Impedance: >50 kΩ, unbalanced
    • CV range: 0 V to +10 V, 1 V/oct
    VCF mod input
    • Type: 2 x 3.5 mm TS jacks, summed
    • Impedance: >50 kΩ, unbalanced
    • CV range: 0 V to +10 V, 1 V/oct
    VCA mod input
    • Type: 2 x 3.5 mm TS jacks, summed
    • Impedance: >50 kΩ, unbalanced
    • CV range: 0 V to +10 V, typically 1 V per 10 dB
    Outputs
    • VCO output
    • Type: 3.5 mm TS jack, DC coupled
    • Impedance: 1 kΩ, unbalanced
    • Max output level: 10 V p-p
    • Frequency range with no external CV: <10 Hz to 500 Hz
    • Frequency range using external CV: <1 Hz to 30 kHz
    VCA output
    • Type: 2 x 3.5 mm TS jacks, AC coupled
    • High impedance: 1 kΩ, unbalanced
    • Low impedance: 3 kΩ, unbalanced
    • High max output level: +18 dBu
    • Low max output level: -2 dBu
    • High output noise: <-60 dBu, 22 Hz -22 kHz
    • Low output noise: <-80 dBu, 22 Hz -22 kHz
    Controls
    • Pulse width manual: 50% to min
    • Waveform: Triangle, sawtooth, pulse
    • Range: 32’, 16’, 8’, 4’, 2’
    • Pitch: 2 octave range
    • Cutoff frequency: 20 Hz to 20 kHz
    • Resonance: Off to self oscillation
    • Sig in level: -∞ to unity gain
    • Mod in level: -∞ to unity gain
    • VCA initial gain
    Power
    • Power supply: Eurorack
    • Current draw: 80 mA (+12 V), 50 mA (-12 V)
    Physical
    • Dimensions: 3.2" x 5.1" x 1.8"
    • Rack units: 16 HP
    • Weight: 0.42 lbs