QSC

collapse expand iconDescription

With amazing audio performance and road-proven durability, the QSC RMX 5050 5,000 Watt Power Amp is suited for a wide range of sound reinforcement applications. Features a 3-tier, Class H design. Extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. Uses the best available components.
Features balanced 1/4" TRS, XLR, and barrier strip inputs, binding posts and Neutrik Speakon outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance. With high-current toroidal transformers for greater 2-ohm power and low noise.

Independent user-defeatable clip limiters reduce distortion.

Selectable low-frequency filters (30Hz or 50Hz) protect speakers and increase headroom.

Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility.

Binding post and Neutrik Speakon outputs.

Has front-mounted gain controls for easy access.

Signal and Clip LED indicators to monitor performance

3-year warranty.
ACCESSORIES
STEREO MODE, Both Channels Driven
8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts
4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts
2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts
8 ohms EIA 1 kHz 0.1% THD 1100 Watts
4 ohms EIA 1 kHz 0.1% THD 1800 Watts
2 ohms EIA 1 kHz 1% THD 2500 Watts
BRIDGE-MONO MODE
8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts
8 ohms EIA 1 kHz 0.1% THD 3600 Watts
4 ohms EIA 1 kHz 1% THD 5000 Watts
Distortion (SMPTE-IM) Less than 0.02%
Distortion (Typical)
20Hz-20kHz: 10dB below rated power
1kHz and below: full rated power
Less than 0.02%
Less than 0.02%
Frequency Response

20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB
5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB
Damping Factor Greater than 250 @ 8 ohm
Noise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load)
Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms

NOTE: The RMX 5050 requires 20A 120V service and is supplied with a NEMA 5-20 plug on the cordset.
Open Box QSC RMX 5050 5,000 Watt Power Amp Level 1
Open Box QSC RMX 5050 5,000 Watt Power Amp Level 1
Open Box QSC RMX 5050 5,000 Watt Power Amp Level 1

collapse expand iconFeatures

  • Extremely high power
  • Advanced thermal performance delivers higher continuous power in 2-ohms stereo or 4-ohms bridged applications
  • Dual mono, high current power supply for increased reliability and performance
  • 3RU chassis is 16" deep.
  • High-current toroidal transformers for greater 2-ohm power and low noise
  • Independent user-defeatable clip limiters reduce distortion
  • Selectable low-frequency filters (30Hz or 50Hz) protect speakers and increase headroom
  • Balanced 1/4" (6.3mm) TRS, XLR, and barrier strip inputs for maximum flexibility
  • Binding post and Neutrik Speakon outputs
  • Front-mounted gain controls for easy access
  • Signal and Clip LED indicators to monitor performance
  • 3-year warranty.
  • ACCESSORIES

collapse expand iconSpecs

  • STEREO MODE, Both Channels Driven
  • 8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts
  • 4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts
  • 2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts
  • 8 ohms EIA 1 kHz 0.1% THD 1100 Watts
  • 4 ohms EIA 1 kHz 0.1% THD 1800 Watts
  • 2 ohms EIA 1 kHz 1% THD 2500 Watts
  • BRIDGE-MONO MODE
  • 8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts
  • 8 ohms EIA 1 kHz 0.1% THD 3600 Watts
  • 4 ohms EIA 1 kHz 1% THD 5000 Watts
  • Distortion (SMPTE-IM) Less than 0.02%
  • Distortion (Typical)
  • 20Hz-20kHz: 10dB below rated power
  • 1kHz and below: full rated power
  • Less than 0.02%
  • Less than 0.02%
  • Frequency Response
  • 20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB
  • 5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB
  • Damping Factor Greater than 250 @ 8 ohm
  • Noise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load)
  • Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms